Table of Contents
Advertisement
Section 6 — L-S Series Panel Operation
Breakaway Source Status
Sticky Levels Mode
106
2. Press the
button to activate level access operation.
Level
Each level displayed in the bottom of the display will now have an
asterisk (
) that indicates it is active (selected for control).
*
• The
arrow buttons scroll through that Destination's acces-
Up/Down
sible levels, displaying each level's active status.
• Pressing the
Take
asterisk from the display.
3. Use the
arrow buttons and
Up/Down
and de-activate or re-activate the desired levels.
4. Press the
Level
button again to turn off level access.
5. Select the desired Source with one of the 32 (or 64 respectively) Source
buttons.
6. Press
to switch that Source to only the activated levels.
Take
7. Press the
Preset
button to turn off the preset mode.
To identify which Sources are currently switched to the levels of a Destina-
tion:
1. Confirm the Destination you want to examine appears in yellow in the
Destination window.
2. Press just the
Level
3. Use the
arrow buttons to view the status of each level. The
Up/Down
name of the current Source will be displayed in green along with the
name of the level. If that Source button is assigned on the panel it will
illuminate.
4. Press the
button again to turn off the mode.
Level
You can turn on Sticky Levels mode to keep active only the last selected
levels after a breakaway take.
1. Press the
button, use the
Menu
and then press
Config?
2. The Sticky Level menu will be displayed with its current status (ON or
OFF).
3. Press
to toggle the state ON or OFF)
Take
4. Press
to escape configuration mode.
Clear
JUPITER L-S and LCD Series Control Panel Instruction Manual
button de-activates that level, removing the
button to move to each level
Take
button.
arrow buttons to scroll to
Up/Down
Take.
Panel
Advertisement
Table of Contents
