LD16 Control Panel
LD16 Operating Modes
LD16 Single Destination Mode
Entering Single Destination Mode
JUPITER L-S and LCD Series Control Panel Instruction Manual119
For a summary of LD16 functions see
Figure 70. LD16 Control Panel
The LD16 has two distinct operating modes, Single Destination and Mul-
tiple Destination.
• When operated in single Destination mode, one Destination is selected
for control and the display windows show the Source for each defined
level of that Destination (video, left audio, right audio, etc.). Breakaway
switching is supported.
• When operated in Multiple Destination mode, the LD16 can be used to
control multiple destinations, with the names of 16 of those Destina-
tions (and the primary Source for each) on display simultaneously.
Multiple Destinations can be switched to the same Source with a single
Take. Breakaway switching is not supported in this mode (except via
Overrides).
In single Destination mode, windows D1-D14 can show the status for each
level of one selected Destination. The currently controlled Destination is
shown under the
Active Dest
1. Press
. The display windows will display various modes and the
Menu
associated active soft buttons will illuminate.
2. Press the D1 window
mode will be selected and the panel will exit the menu mode.
The active Destination is shown in yellow in the D15 window. The level
names should appear, in amber, in the D1-D14. The D16 window will report
, or the highest numbered level that is currently selected.
All Levels
page
33.
Override
Source
legend in the D15 window.
soft button. Single Destination
Single Destination?
LD16 Control Panel