Table of Contents
Advertisement
Panel Info Button
JUPITER L-S and LCD Series Control Panel Instruction Manual151
The Panel Information menu will appear when the
pressed. There is nothing to select in the Panel Information menu, these
buttons are for information only. The Information is broken up into three
different "pages." Use the Scroll wheel to cycle through the available infor-
mation pages.
Figure 82. LCD16 Control Panel
Button #1-8
The features of each page are explained below:
Page #1
: This button is in the #1 location. The
Panel ID button
panel name that has been assigned in the Jupiter configuration, and the ID
that is assigned by the user to retrieve the correct Control panel configura-
tion settings from the host. The ID can be assigned via the Web page or
directly from the panel.
: This button is in the #2 location. The
Physical ID button
the physical ID and name (For example, HW: 265, LCD16) that is assigned
by the front panel hardware.
: This button is in the #3 location. The
Net-1 button
current IP address that is assigned to the Control panel's first LAN port that
is on the back of the panel. This assignment is made using the NetConfig
application or through the Web page.
: This button is in the #4 location. The
Net-2 button
current IP address that is assigned to the Control panel's second LAN port
that is on the back of the panel. This assignment is made through the Web
page. (The second LAN port is for future use only.)
: This button is in the #5 location. The
Pri. Host IP button
plays the current Primary Host IP. This assignment is made through the
Web page.
: This button is in the #6 location. The
Sec. Host IP button
plays the current Secondary Host IP. This assignment is made through the
Web page.
Menu Modes
is
Panel Info button
Button # 16
shows the
Panel ID button
shows
Physical ID button
displays the
Net-1 button
displays the
Net-2 button
dis-
Pri. Host IP button
Sec. Host IP button
dis-
Advertisement
Table of Contents
