GRASS VALLEY JUPITER L - V2.1.0 Instruction Manual page 91

JUPITER L-S and LCD Series Control Panel Instruction Manual
4. Use the Scroll wheel to change the Connection type in the N: field to
Serial.
The button will then turn green.
Connection
5. Press the
Connection
an option to change the Device ID.
6. Use the Scroll wheel to scroll to the preferred Device ID setting.
7. Press the
Connection
The button will then turn red and the following text will
Connections
then appear, "Settings Updated -Standby-."The Panel will then reboot
and apply the changed settings.
Changing the Connection Type Using the Panel's Menu
button to apply the change. You will then be given
button to apply the change.
91