Table of Contents
Advertisement
Section 7 — LCD Introduction
LCD Series Control Panel Features
144
Each LCD Control panel has the following features:
• Can be connected to your LAN based network.
• Includes Multi-color LCD buttons. Each of these buttons can display
three lines of text. Each line can display up to 10 characters.
• Includes a scroll wheel. This wheel is used to navigate through the dif-
ferent pages. Pressing the wheel in will open the "Menu mode."
• Includes six operation modes:
• X-Y mode
• Single Destination mode.
• Multiple Destination mode.
• Category Entry mode.
• Level Mode (Used for level-breakaway switches).
• B.P.S. mode (Button per Source).
• Includes four menu options:
• Sequence selection.
• Override selection.
• Sticky Destinations (Controlled by the Panel user.) for the following
modes:
•
Multiple Destination mode.
•
B.P.S mode.
• Sticky level mode. (Controlled by the Panel user.)
• Includes multiple-use button functionality, which includes quick-pick
modes for Destination, Source, Sequences, and Overrides.
• Includes multiple outputs can be configured from the Jupiter configu-
ration editor.
• All key panel parameters are saved in non-volatile memory.
• Is compatible with Grass Valley Net Config Application.
• Includes key control sets that can be changed from Jupiter without
causing the CM to reboot or any Jupiter system interruptions.
• Supports CM-4000 (or CM-4400) / AccuSwitch redundancy.
• Supports Jupiter Mnemonic aliasing or labeling.
• Supports Jupiter Output level sets.
• Supports Jupiter Destination Security for the Advise, Lock, and Protect
options.
JUPITER L-S and LCD Series Control Panel Instruction Manual
Advertisement
Table of Contents
