Table of Contents
Advertisement
Breakaway Switching
Direct Selection Breakaway
Menu Breakaway Method
JUPITER L-S and LCD Series Control Panel Instruction Manual105
To Unlock a Destination:
1. Confirm the Destination to be unlocked appears in yellow in the
Destination window (accomplished with Direct or Menu Destination
selection described earlier). The
2. Press
. The button will stop blinking and the
Protect/Lock
illuminate.
3. Press
to unlock the Destination. The
Take
to low amber.
Breakaway takes of individual levels can be performed by directly selecting
previously assigned Level buttons, or by using the menu.
Individual levels can be switched by first assigning Level buttons on the
panel (see Button Assignment
for the levels you want to switch before pressing the new Source button.
1. Confirm the Destination for the breakaway appears in yellow in the
Destination window (accomplished with Direct or Menu Destination
selection described earlier). The buttons assigned as Levels will
illuminate in amber.
2. Press the assigned Level buttons so only those you wish to switch are
illuminated. The name of the lowest numbered selected level will be
displayed in the menu.
3. Select the Source for those levels (by either Direct or Menu Source
selection as described in Selecting a Source
When an assigned Level button is individually selected (high amber), the
current Source (in blue) and level name (in red) for the currently controlled
Destination will be displayed in the menu.
If individual Level buttons are not assigned, the menu display can be used
to perform breakaways.
1. Press the
button to activate preset mode.
Preset
button will blink red.
Protect/Lock
Protect/Lock
on page
108). You then select just the buttons
on page
L32/L64 Control Panels
button will
Take
button will return
102).
Advertisement
Table of Contents
