Direct Selection With Preset; Menu Selection Method; Protecting A Destination - GRASS VALLEY JUPITER L - V2.1.0 Instruction Manual

Direct Selection with Preset

Menu Selection Method

Protecting a Destination

JUPITER L-S and LCD Series Control Panel Instruction Manual103
Preset allows you to confirm the identity of the Source before it is switched
to the Destination.
1. Press Preset so it is illuminated.
2. Press the low green button for the desired Source. The Source will NOT
be taken to that Destination. Instead, the
along with the Source button just pressed, and the name of the Source
will be displayed in blue in the Status (L32) or Preset (L64) window.
Different Sources can be selected until the correct one is found.
3. Press . That Source will then be switched to the Destination.
Take
4. To exit Preset mode, press the
1. Clear the panel (
Level
2. Use the arrow buttons to scroll through the available Sources.
Up/Down
The name of the currently chosen Source appears in blue in the Status
(L32) or Preset (L64) window, but will not yet be switched to the
Destination.
3. Press . The Source will switch to the Destination and its name will
Take
appear in green in the window.
To Protect a Destination:
1. Confirm the Destination to be protected appears in yellow in the
Destination window (accomplished with Direct or Menu Destination
selection described earlier).
2. Press once. The button will illuminate in amber and the
Protect/Lock
button will light green.
3. Press to protect the Destination. The
Take
amber.
Take
button so it is turned off.
Preset
, , and buttons OFF)
Menu Preset
Protect/Lock
L32/L64 Control Panels
button will illuminate
Take
button will blink