Table of Contents
Advertisement
Protection
JUPITER L-S and LCD Series Control Panel Instruction Manual173
3. Press the preferred Destination button in the Destination button area.
For an example, see
yellow.
Note
These figure are for example only, the number of Destinations are configu-
rable.
Pressing more than one button will select multiple Destinations. The
selected Destination buttons will then turn white.
Figure 91. LCD16 -BPS Mode
Source Buttons
Figure 92. LCD48 - BPS Mode
4. Use the Scroll wheel to see the available Sources.
5. Select the Sources by pressing the preferred green Source button. The
Take request is then sent immediately to the host.
Protecting a Destination prevents that Destination from being switched by
other panels in the system. The protecting panel may still change the Des-
tination. The
Protect/Lock
will blink magenta if any selected Destination's level is protected by the
local panel. The button will illuminate solid magenta if protected by
another panel. The panel that owns the protect function will also be dis-
played on the destination button.
Figure 91
and
Figure
92. Destination buttons are
Source Buttons
button on the panel that owns the protect function
Basic Panel Operations
Destination Buttons
Destination Buttons
Advertisement
Table of Contents
