Table of Contents
Advertisement
Section 5 — Connecting the L-S, LCD Panel
LD4
84
Figure 51. L32 Connection Menu
- Connection -
C: Lan
N: Lan
6. Press the
or the
UP
N: field to Serial.
The
button will then turn green.
Take
7. Press the
button to apply the change. You will then be given an
Take
option to change the Device ID.
8. Press the
or the
UP
setting.
9. Press the
button to apply the change.
Take
The Panel will then reboot and apply the changed settings.
Note
Press the Clear button at any time to exit the menu without making changes
to the current settings.
Figure 52. LD4 Control Panel
Follow these steps to change the Connection Type setting using the LD4
panel's menu:
1. Press the
Menu
button. The displayed items will change; look at the D1
Display window (the far-left display window).
2. Press the
or the
UP
3. Press the #
button to select the Panel Setup? option
1
page
85).
JUPITER L-S and LCD Series Control Panel Instruction Manual
Arrows to change the Connection type in the
Down
Arrows to scroll to the preferred Device ID
Down
Arrows to scroll to the Panel Setup? option.
Down
(Figure 53 on
Advertisement
Table of Contents
