GRASS VALLEY JUPITER L - V2.1.0 Instruction Manual page 176

Section 11 — LCD Series Panel Operation
176
Selecting the Destination using the Direct Entry Method
Follow these steps to select a Destination using the Direct Entry method:
1. Scroll through the available Destinations using the Scroll wheel. The
Destinations will change.
2. Select the Destination by pressing the preferred button. The selected
destination now becomes "Preset source."
The Preset source means that the selected source will be switched to the
destination when the
diately revert back to the previous mode. For example, the Level mode.
Selecting the Destination using the Category Entry Method
Follow these steps to select a Destination using the Category Entry method:
1. Press the category name and then scroll through the available
Destinations using the Scroll wheel.
2. Select the entry number by pressing the destination button.
3. Press the Take button. The panel will then immediately revert back to
the previous mode. For example, the Level mode.
Note The Select Destination? button will not work in the Category Entry or the
B.P.S. mode.
LCD16
• The panel will display the destination entries on buttons #1-14.
• Button #15 is used to switch to category entry method of destination
selection.
• Button #16 will display the current destination.
Figure 95. LCD16 -Select Destination Mode
Entry Buttons
LCD48
The LCD48 displays both the Direct Entry buttons (on the Left half) and the
Category Entry buttons (on the Right half) of the panel
JUPITER L-S and LCD Series Control Panel Instruction Manual
button is pressed. The panel will then imme-
Take
Category Buttons
(Figure 96).