Alternate Mode Operation; Multiple Destination Mode - GRASS VALLEY JUPITER L - V2.1.0 Instruction Manual

Alternate Mode Operation

Multiple Destination Mode

JUPITER L-S and LCD Series Control Panel Instruction Manual133
• Locking a Destination
• Breakaway Switching
• Sticky Levels Mode
• Executing a Sequence (Salvo)
• Source Swap Mode
• Button Assignment
• L-S Front-Panel Service Modes
Alternate mode can be useful when all 100 buttons to the left of the status
displays have been assigned to Sources, Destinations, sequences, or levels
and the operator wants to make additional assignments on a temporary
basis. Alternate mode allows the top six buttons in the right-hand button
cluster to be used for this purpose.
Figure 77. Alternate Mode Buttons
Button assignments must be made prior to entering Alternate mode. See
Button Assignment on page
Activating Alternate Mode
1. Press .
Menu
2. Use the arrow buttons to scroll to
Up/Down
3. Use the arrow buttons to scroll to
Up/Down
will report its current status (OFF or ON).
4. Press to toggle the state and exit Menu mode.
Take
This function allows gang switching where the same Source is switched to
multiple Destinations with a single Take. When active, this mode allows the
selection of multiple assigned Destination buttons simultaneously.
on page 104
on page 105
on page 98
on page 107
on page 107
on page 108
on page 185
108.
S100 Control Panel
Protect/
Lock
and press
PanelConfig?
. The window
Alternate mode
Panel
ID
Take.