Table of Contents
Advertisement
Section 5 — Connecting the L-S, LCD Panel
S100
Preset/Level Display
Window
86
Note
Press the Clear button at any time to exit the menu without making changes
to the current settings. Press the Menu button at any time to exit from the
current location without making changes to the current settings but remain
in the menu.
Figure 55. S100 Control Panel
Follow these steps to change the Connection Type setting using the S100
panel's menu:
1. Press the
button. The items will change; look at the Preset/Level
Menu
display window (the bottom display window).
2. Press the
or the
UP
(Figure
56).
The
button in the lower right-hand corner will then turn green
Take
(Figure
56).
Figure 56. S100 Control Panel Menu
3. Press the
Take
button.
JUPITER L-S and LCD Series Control Panel Instruction Manual
Arrows to scroll to the Panel Setup? option
Down
Panel
ID
Protect/
Lock
UP or Down Buttons
Take Button
Advertisement
Table of Contents
