Gp 11 Connecting The Power And Switching On The Machine - Xerox Phaser 3100MFP Service Manual

GP 11 Connecting the Power and Switching on the Machine

1. Make sure the machines On/Off switch (H) is positioned to Off (position 0).
2. Plug one end of the power cord (B) into the machines power socket (I), refer to
3. Plug the other end of the power cord (B) into the power supply wall socket.
4. Set the On/Off switch (H) to On (position I).
The machine powers on. After a few seconds, when the machine has warmed up, the Easy Install
function is launched and the LCD screen displays the following message:
LANGUAGE
YES=OK - NO=C
Refer to the User Guide booklet for more information on carrying out the Easy Install initial setup.
Phaser 3100 MFP
General Procedures and Information
04/08
GP 10.
6-29