require a clinician access code. (See "Clinical Information and Access Code" chapter for access
code information, lock setting table and available features for each lock setting.)
2. ClinDOSE? (Clinician Dose): Allows an additional prescribed dose to be administered by a
clinician at any time except during a Load Dose or Bolus Dose.
is determined by the administration route (see Figure 5.1).
Note: If a lock setting of 1, 2 or 3 is selected, an access code will be requested. If you wish to
give a clinician dose at this time, press the NO/CHANGE key to" change OFF to ON
change OFF to ON and press YES key. Enter the amount of clinician dose to be delivered.
Press YES to accept the clinician dose menu.
screen is accepted and the pump is running.
completed:
e graphic bar now depicts the clinician dose in progress and when this dose is complete,
reverts back to re ecting the container in progress.
Pressure ("L Press") which displays the current patient side (downstream) pressure in the
administration set in millimeter of mercury (mmHg) units.
I M PORTAN T
I N FORM AT I ON
previous running rate, and resume the PCA therapy.
restart at the end of the clinician dose to prevent a bolus from being delivered too quickly after
a clinician dose.
Once the clinician dose is given, the clinician-dose eld returns to its default of "0," and any
subsequent clinician doses will need to be reentered.
3. SHFT TOT (Shift Totals):
period of time, such as an 8 or 12-hour shift. To access Shift Totals, press the NO/CHANGE
key to change OFF to ON and then press YES/ENTER.
alternately:
C l i n i c i a n
C l i n i c i a n
D o s e
e "Volume Infused" will toggle with "Dose Infused" if mg or mcg are
the selected unit. Remaining dose time will toggle with remaining dose
volume to infuse.
When the clinician dose is complete, the pump will return to the
is feature allows the clinician to track the infusion for a selected
8 0
e Maximum Clinician Dose
D o s e
M e n u
e Clinician Dose will begin when the options
e following Run Screen will appear until it is
R u n
S c r e e n
e graphic bar will toggle with Line
e lockout time for bolus dosing will
e following screens will appear
Need help?
Do you have a question about the Curlin 6000 CMS IOD and is the answer not in the manual?
Questions and answers