Cle a ning, Environm e nt a l Condit ions, a nd
M a int e na nc e
Following the guidelines for care listed below will assure the best appearance and longest life of the Moog
Curlin Infusion pump.
e Moog Curlin Infusion pumps are designed to be resistant to uid spillage from any direction
but are not to be immersed in solutions. Keep the pump and the pumping surfaces clean, dry, and
free of uid spillage at all times. Do not use the pump in the shower, sauna, or steam bath and
do not position the pump where it could accidentally be dropped into a container of uid, (e.g.
basin, tub, or toilet).
e pumping surfaces can be cleaned with a cloth dampened with any of the
following solutions, and dried with a soft cloth without harming the pump.
Clean the pump, remote bolus cord, AC adaptor, safety shells, holster and battery pack with a soft
cloth dampened in any of the following:
•
Warm soapy water (do not submerse)
•
Isopropyl alcohol
•
Household bleach, diluted 9:1 with water
•
Commercial disinfectant
(Do NOT spray the cleaning solution directly on the pump.)
I M PORTAN T
prohibited:
I N FORM AT I ON
•
•
•
•
With proper care, the pump will retain its nish for many years of
service.
Cle a ning
e following cleaning/disinfecting methods are speci cally
Do not use full strength bleach
Do not autoclave or use steam sterilization
Do not clean in a dishwasher
Do not use acetone, lacquer thinner, or any other solvents or
abrasive cleansers to clean the pump
1 5 7
Cha pt e r
11
Need help?
Do you have a question about the Curlin 6000 CMS IOD and is the answer not in the manual?
Questions and answers