Moog Curlin 6000 CMS IOD User Manual page 137

7. To continue priming, press the PRIME key again. If priming is complete, press YES/
ENTER to exit and return to the Run Options Screen.
priming session displays on the bottom eld.
Note: e amount of uid used in the priming process will be deducted from the Bag Volume
Total but will NOT be counted in the amount infused because this amount is not to be
delivered to the patient.
TBI before you can proceed with the infusion. If it is not, an alert will appear stating, AMT
TBI GREATER THAN BAG VOL. You have the option to continue by pressing the YES/
ENTER key or return to the Run Options Screen by pressing the NO key.
Once the prescription is programmed, there are more customizing features available for each
therapy. Press the OPTIONS key from the Run Options Screen to access these options.
OPTIONS menu can also be accessed while the pump is running.
Note. After the infusion has started, any changes made through the OPTIONS menu involving:
"HRLY TOT" and
•
"CLR HRLY"
•
will return you directly to the "ACCEPT OPT?" eld.
e following screen displays the Variable
the up and down arrows to move the highlight bar to the desired option. Lock settings may require
an access code before the option can be changed. Any new setting, except "CLEAR HOURLY"
screen acceptance becomes e ective when the Options Screen is exited by pressing YES/ENTER at
the "ACCEPT OPT?" eld.
Note: e pump's default settings are indicated above in the left screen.
e bag volume should still be equal to or greater than the Amount
Opt ions
erapy Options available. When you open this menu, use
V a r i a b l e O p t i o n s
1 2 5
e total amount of solution used in this
M e n u
e