Moog Curlin 6000 CMS IOD User Manual page 76

3. CLR HRLY (Clear Hourly Totals): To clear Hourly Totals press the NO/CHANGE key to
change OFF to ON and then press YES/ENTER.
a. To clear the Hourly Totals, press the YES/ENTER key. All Hourly Totals will be cleared
and the cursor will return to the Options Menu.
b. To maintain the Hourly Totals, press the NO/CHANGE key. Hourly Totals will be
maintained and the cursor will return to the Options Menu.
c. A lock level 2 or 3 will require an access code entry before allowing hourly total reset.
4. TitrRx (MedLMTS™ Prescription): If this feature was not selected in the Pre-Prescription
Menu, it will not appear on the Options Menu. If a MedLMTS™ prescription was programmed
and if the therapy is to be Medlimitd now, select "ON" and then press the YES/ENTER key to
accept and to go to the Continuous MedLMTS™ menu:
is screen allows the user to change the rate within the prede ned prescription limits.
a. RATE: Using the numeric keys, enter the new desired rate. When the new rate has been
entered, press the YES/ENTER key to move to the next eld. If the MedLMTS™ option is
used to change the rate, the new rate will then appear on the run screen and on the prescription
menu whenever it is reviewed.
b. ACCEPT? YES/NO: Use the Up/Down arrows to move to a eld and change the data
entered at this time. To abort this screen entirely, press NO at this prompt, and the display
will return to the options menu. If the rate is correct, press the YES/ENTER key, and the
new rate will automatically be accepted.
screen is exited.
c. New values will be in e ect when the Options Menu is exited.
5. DN Occlu (Down Occlusion):
the line between the pump and the access site— e.g., a kink in the tubing between the pump
and the patient, a blockage in the access site, a clamp left on the distal tubing.
options for this eld: the "Low" setting (default setting) triggers the alarm when it
C l e a r H o u r l y
C o n t i n u o u s
is feature allows the pump to sense an occlusion pressure in
6 6
e following screen will appear:
T o t a l s S c r e e n
M e d L M T S M e n u
e display returns to the Options Menu when this
ere are two