Moog Curlin 6000 CMS IOD User Manual page 126

programmed, a Select
therapy to repeat by moving the cursor to the therapy of choice and pressing the YES/ENTER
key.
e pump will then display the program screen with the last programmed values of the therapy
and the cursor will automatically advance through the prescription menus. You can stop the auto-
advance function by pressing any key (except ON/OFF) and then complete the con rmation of
the prescription manually by pressing the YES key at the remaining elds.
Note: e previously programmed AIL setting is also retained.
When the program is accepted, the display returns to the above Run Options Screen. If the
current therapy is still in progress when the "REPEAT Rx" function is selected, the following
screen will appear:
a. is screen is a reminder that the infusion is not complete. If the therapy is to be
terminated and a new IV container added, press YES/ENTER to go to the programming
screen, con rm the program and proceed with the repeat infusion.
b. If the incomplete therapy is to be continued, press NO and the Pause Menu Screen will
be displayed, then press YES and the Run Options Screen will be displayed. To resume the
un nished therapy, press RUN.
Following the con rmation and acceptance of the prescription screens, a screen will appear to
con rm the dosing schedule.
terminated prior to the completion of the infusion.
I n t e r m i t t e n t
e dosing schedule of the previous container is retained and displayed on this screen. In Lock
setting 0 and 1, you can change the time. In lock 2 or 3, the next dose time is displayed but
requires an access code before allowing a change. When the next dose time is correct, press the
YES/ENTER key. e cursor will move to the "DONE?" eld, press the YES/ENTER key again
and the Run Options Screen will display.
erapy Screen will list all preprogrammed therapies. Select which
is screen is displayed only if the previous INT infusion was
D o s i n g
1 1 5
S c h e d u l e