Moog Curlin 6000 CMS IOD User Manual page 107

pump has been set into a locked condition, any subsequent request to change the lock will
require a clinician access code. (See "Clinical Information and Access Code" chapter for access
code information, lock setting table and available features for each lock setting.)
2. HRLY TOT (Hourly Totals): To view hourly infusion totals press the NO/CHANGE key to
change OFF to ON and then press YES/ENTER.
a. e screen displays hourly infusion delivery for each hour (00-23) of the last 24 hours of
therapy in the unit selected.
a. e highlighted eld has a marker
b. Use the up arrow key to scroll back through the last 24 hours.
c. If the infusion was not running, a series of ------ will appear for that hour.
d. To exit this screen, press the NO/CHANGE key.
3. CLR HRLY (Clear Hourly Totals): To clear Hourly Totals press the NO/CHANGE key to
change OFF to ON and then press YES/ENTER.
a. To clear the Hourly Totals, press the YES/ENTER key. All Hourly Totals will be cleared
and the cursor will return to the Options Menu.
b. To maintain the Hourly Totals, press the NO/CHANGE key. Hourly Totals will be
maintained and the cursor will return to the Options Menu.
c. A lock level of 2 or 3 will require an access code entry before allowing Hourly Totals reset.
4. DN Ramp (Early Down Ramp): During a TPN infusion, it may be necessary or desirable
to stop the level rate of infusion and begin an early down ramp process.
is 0:00 to 9:00 HH:MM. Selecting early ramp down by selecting "ON" and pressing the YES/
ENTER key when the highlight bar is on this eld brings a second screen as seen below:
H o u r l y T o t a l s
indicating the current hour in progress.
C l e a r H o u r l y T o t a l s
9 7
e following screen will appear:
S c r e e n
e following screen will appear:
S c r e e n
e range for this eld