During transport or storage, the batteries should be removed, the pump should be cleaned and
kept in its hard-shell packing case.
•
An ambient temperature -20° F to 140°F
•
A relative humidity range of 5%-95%; 375 to 795 mmhg
•
An atmospheric pressure range of 500 Hpa to 1060 Hpa
All accessories should be stored in their original packing containers to ensure the longest service.
e following conditions of ambient temperature range and relative humidity are recommended
for the uid delivered accuracy of:
•
Temperature:
•
Relative Humidity:
Yearly preventive maintenance checks are recommended and will be prompted in the Setup Menu
and on the display when the date occurs.
reset when each annual maintenance check is completed.
Any time an error code message occurs repeatedly or any time a pump appears to be tampered
with or shows any indication of not performing to standards, the pump should be returned to the
healthcare provider dispensing the pump.
At no time should unauthorized personnel open the hard case of the pump.
ZEVEX, Inc. (the manufacturer) warrants to the original purchaser that the infusion pump
(the pump), not including accessories, shall be free from defects in material and workmanship
under normal use, if used in accordance with this User's Manual, for a period of one year from
the actual date of sale to the original purchaser. THERE ARE NO OTHER WARRANTIES.
e warranty does not cover normal wear and tear and maintenance items, and speci cally excludes
batteries, administration sets, extension sets or any other accessory items or equipment used with
the pump.
Subject to the conditions of and upon compliance with this limited warranty, the manufacturer
will repair or replace at its option without charge (except for a minimal charge for postage and
handling) any pump (not including accessories) which is defective if a claim is made during such
one year period.
e following conditions, procedures, and limitations apply to the manufacturer's obligation
under this warranty:
Tra nspor t a nd St ora ge
e environmental conditions should be within the range of:
Ope rat ing Environm e nt
±5% Accuracy: 55 to 90°F
±10% Accuracy: 45 to 55°F
±10% Accuracy: 90 to 104°F
15 to 95% Non-condensing
M a int e na nc e
is date accrues from the date of factory release and is
Lim it e d Wa rra nt y
1 5 8
Need help?
Do you have a question about the Curlin 6000 CMS IOD and is the answer not in the manual?
Questions and answers