Moog Curlin 6000 CMS IOD User Manual page 131

Va ria ble T he ra py
is therapy is designed to allow twenty-four speci ed programs of varying amounts, rates, and times of
delivery.
B
egin programming a Variable
Screen. e following display screen will appear, requiring you to enter information needed
to program this therapy.
V a r i a b l e
ese menu items allow you to customize the program to match each individual prescription.
e pump's default settings are displayed in the left screen. Each eld is individually explained on
following pages.
Note: Some of the lines are abbreviated to t on the display screen; the full descriptions appear
below.
1. UNITS: Allows you to select from units of mL, mg, or mcg, to match the prescription.
pump will allow a volume range of 0.1 to 400 mL/hr; therefore, if mg or mcg is selected, the
concentration requested in the next eld will determine the upper and lower programming
limits for mg and mcg. Use the NO/CHANGE key until the desired units appears on the
display, and then press the YES/ ENTER key to accept and move to the next eld.
2. CONCEN (Concentration):
eld and requires data entry of the concentration of mg or mcg per mL. When the correct data
is entered using the numeric keys, press YES/ENTER to accept, and move the cursor to the next
eld. If mL is chosen in the "UNITS" eld, this line will not display.
0.1 to 999.
3. DELAY Start: is eld allows you to delay the start of the infusion from one minute up to
twenty-four hours. If the infusion is NOT to be delayed, select "OFF" and press "YES/ENTER"
to enter. e cursor will move to the next eld. If the infusion IS to be delayed until a later time,
press the NO/CHANGE key.
erapy by selecting "Variable" from the Select
Pre sc ript ion M e nus
P r e - P r e s c r i p t i o n
is eld is active whenever mg or mcg is selected in the "UNITS"
e delay start will change to
1 1 9
Cha pt e r
8
M e n u S c r e e n
e range for this eld is
erapy
e