Moog Curlin 6000 CMS IOD User Manual page 127

3. NEW PROGRAM: To program an entirely new prescription or a di erent therapy, press the
YES/ENTER key at this eld (the ability to change these parameters may be controlled by the
lock setting). e display will return to the Select
is enabled, or to the Pre-Prescription Screen of the single therapy mode. If the current container
has not completely infused, the following screen will appear:
a. is screen is a reminder that the infusion is not complete. If you want to return to the
current container and nish infusing it, press the NO/CHANGE key to return to the Pause
Menu screen.
b. To abort the current container and enter a new program, press the YES/ENTER key. If a
prescription has previously been entered for the therapy mode you wish to program, the
following screen will appear:
c. If you want to save the current prescription, press the NO/CHANGE key to return to the
Pause Menu screen. If you wish to erase the current prescription and enter a new program,
press the YES/ENTER key to proceed. All previous prescription values will be erased.
Note: Selecting "NEW PROGRAM" will also reset the OPTIONS selected to their default
settings except for the LOCK and AUDIO settings which must be changed manually.
T im ing Rule s w he n I nt e rrupt ing I nt e r m it t e nt T he ra pie s
Remember, this therapy is time dependent, and the following rules
I M PORTAN T
apply for interruptions in the therapy.
I N FORM AT I ON
For the Intermittent erapy the pump automatically cycles through dosing and KVO. A single
beep alerts the user to the change in the cycle. If the KVO rate is set at "0" the pump can be o
between those doses.
When the pump is idle or o , the internal time clock of the pump continues to monitor the
dosing cycle and the following time considerations apply:
Ent e ring a N e w Progra m
erapy Screen if more than one therapy mode
1 1 6