Moog Curlin 6000 CMS IOD User Manual page 64

Progra m m ing a Pum p w it h a Prot oc ol Libra r y
Note: e ability to program, resume, or repeat a Library Protocol is restricted to the LIBRARY
menu option.
Press to scroll down to the LIBRARY function.
Highlight LIBRARY, and then press YES, the following screen appears:
R e s u m e / R e p e a t
Note: e "RESUME" and "REPEAT Rx" options may not appear if a therapy has not been
previously programmed or has run to completion.
ere are three di erent ways that you can start a therapy:
RESUME: Should be used if a therapy is interrupted.
•
o , and continues the current therapy.
REPEAT Rx: Should be used to hang a new bag and repeat the same therapy over
•
again. e infusion history displayed is reset (volume infused, boluses requested, boluses
received, etc). Shift Totals and Hourly Totals continue to accrue.
NEW PROGRAM: Should be used to program a totally new Library Rx.
•
Progra m m ing a N e w Libra r y T he ra py
NEW PROGRAM—If the cursor is moved to this eld and the YES/ENTER key is pressed, the
display changes to allow you to select which Library therapy you wish to program:
1. If the desired Category/Care Area is not already listed on the rst screen, select YES to answer
"Page Down." is will bring up additional screen(s) with additional choices.
2. If Category/Care Area is already listed on rst screen press to scroll down to the choice you wish
to select.
3. When the Category/Care Area that you wish to choose is highlighted, press YES to select that
option.
4. If the Library erapy is not already listed on the rst screen select YES to the right of "Page
Down." is will bring up additional screen(s) with additional choices.
5. If the Library erapy is already listed on rst screen press to scroll down to choice you wish
to select.
6. When the Library
option.
7. Press YES again to ACCEPT this Library
R x / N e w
erapy that you wish to choose is highlighted, press YES to select that
P r o g r a m
e pump picks up where it left
erapy selection.
5 5
M e n u