Moog Curlin 6000 CMS IOD User Manual page 56

f. When the "ON/OFF" status of each therapy is satisfactory, move the cursor to the last eld,
"ACCEPT?" and press the YES/ENTER key to accept. To abort the enable therapy process,
press the NO key to exit this menu and return to the BIOMED SETUP Menu.
g. At least one therapy must remain enabled before you exit this screen.
Note: If a therapy that has previously been programmed is disabled, the program is cleared, and
the default settings are reestablished.
e patient history log is a cumulative record of the approximately last 6,000 events that have
occurred in the pump. Example: When prescription information is saved using the YES/
ENTER key at the "DONE" or "ACCEPT" elds, a copy of the information also gets 'date and
time stamped' and is recorded in the patient history log. Alarms, error codes, certain alerts, and
certain key press events also get logged when they occur.
using the Moog Curlin Infusion print package and by selecting the "Print Pt. Hx" option.
Selecting the "Clear Hx Log" option will erase the patient history log. When the history log is
full, it will overwrite on a " rst-in, rst-out" basis.
Note: e patient history log should be printed before clearing occurs if a hard copy record is
required. e history log, when printed, lists the most recent event rst. Clearing the history
log does not a ect the saved patient information.
When printed, the patient history log includes a heading at its beginning and a footer at its end.
e heading includes the pump serial number, the patient history log title and revision number
information of the software and hardware of the pump.
how much of the history log has been used.
rst, and organized for easy transfer to a spreadsheet for sorting and reporting. A partial sample of
a history log is given below:
Pat ie nt H ist or y Log
e information is printed with the most recent event
4 7
e patient history log can be printed
e footer contains information about