Moog CURLIN 6000 Worksheet

Worksheet for Non-Library Programming
INTERMITTENT THERAPY
Refer to the CURLIN 6000 User Manual for complete programming instructions.
PATIENT:
PROGRAMMING / SETUP SEQUENCE
NOTE: Use the (UP) or
data entry. Use the YES and NO keys to accept/confirm or reject/change a field entry.
1. Turn the pump on and wait for the self-test to complete, note the power source with power graph on the screen.
2. Highlight PROGRAM from the SELECT menu and press YES
NOTE: If the following screen displays "NEW PROGRAM", the PREVIOUS RX has not been cleared. Refer to the last section of the "CURLIN
6000 TRAINING & QUICK REFERENCE GUIDE FOR BETWEEN PATIENT USE" to clear all Previous RX prior to new patient use.
Highlight INTERMITTENT from the therapy selection menu and press YES.
3.
NOTE: If any on-screen alerts appear, the Previous RX has not been cleared. Refer to the last section of the "CURLIN 6000
TRAINING & QUICK REFERENCE GUIDE FOR BETWEEN PATIENT USE" to clear all Previous RX prior to new patient use.
With Unidentified highlighted, press YES (this indicates Manual Programming Mode)
4.
5. UNITS: Press YES if units desired is indicated (choices are mg, mcg or mL). To
change units press NO until desired unit is reached, then press YES to confirm.
CONCEN: If mg or mcg selected, enter the concentration and press YES
DELAY: Press YES to leave the delayed start feature off,
6.
press NO to set a delay then, press YES to ON:
TIME: Enter time infusion to begin, press YES
DATE: Enter date infusion to begin, press YES
ACCEPT?: Press YES
At NEXT? Press YES to continue
7.
BAG VOL: Enter bag volume, press YES. (Bag volume should include
8.
overfill volume if pump priming and/or a KVO is programmed.)
NOTE: To force an auto-calculation, enter any 2 of the following 3 entries: AMT/DOSE, DOSE RATE or DOSE DURA.
The unknown field will auto-calculate. Bypass the unknown field by using the DOWN ARROW key. Enter the
known fields pressing YES to confirm each. The unknown field will auto-calculate. Press YES to confirm this field.
tel: 801.264.1001
toll free: 800.970.2337
www.curlinpump.com
(DOWN) ARROW keys to move highlighter and the numeric keys for
PUMP SERIAL #:
UNITS:
CONCEN:
DELAY:
TIME:
DATE:
BAG VOL: