Moog Curlin 6000 CMS IOD User Manual page 60

I M PORTAN T
I N FORM AT I ON
15. When BIOMED SETUP is complete, move the cursor to the "DONE?" eld and press the
YES/ENTER key to return to the Program or Set-Up Menu Screen.
To select "PROGRAM" use the arrow keys to move the cursor to the eld and press the YES/
ENTER key. If no therapy is already programmed, a "Select
you to select a therapy. If a therapy has been programmed, the following screen appears:
R e s u m e / R e p e a t
ere are three di erent ways that you can start a therapy:
•
RESUME: Should be used if a therapy is interrupted.
and continues the therapy.
•
REPEAT Rx: Should be used to hang a new bag and repeat the same therapy over again.
e infusion history displayed is reset (volume infused, boluses requested, boluses received,
etc). Shift Totals and Hourly Totals continue to accrue.
•
NEW PROGRAM: Should be used to program a totally new Rx. All the therapy parameters
in the pump are set to factory default and must be re-entered by the clinician.
e judicious choice of the option can help speed up programming.
options:
If a therapy is in progress, the date and time changing functions will
not be accessible until the therapy is complete. If "***ALERT***
DATE AND TIME CHANGE NOT ALLOWED" appears you will
need to go to CLEAR PATIENT DATA/Rx above date and time and
choose "enter" and then "yes" to clear Pt data and Rx.
time change will be allowed.
Progra m
P r o g r a m / B i o M e d
R x / N e w
5 1
S e t u p M e n u
erapy Screen" appears prompting
P r o g r a m M e n u
e pump picks up where it left o ,
is screen gives you all three
en date and