ETC Obsession User Manual page 96

96
Combining Link and Follow to create playback loops
You may use Link and Follow to create cue playback sequences
in which a group of cues plays back automatically and repeats.
Follow these steps to create a five cue sequence:
Keystrokes:
1. Create five cues numbered 1,
2, 3, 4, and 5.
2. Press [Cue], then enter [1],
the number of the first cue
you want to include in the
playback loop.
3. Press [Follow] [5] [Enter].
4. Repeat steps 2 and 3 for cues
2 through 5.
5. Press [Cue], then enter [5],
the last cue in the playback
loop.
6. Press [Link], then enter [1],
the first cue in the playback
loop.
7. Press [/] and enter the number
of times you want the link o
execute (1-9), then press
[Enter].
Note: The number to the ight of the slash indicates the number
of times you want the lo p to repeat after it runs the first time.
Enter 4 to the right f the slash to play the loop five times. If you
do not enter a repeat number, the loop will run indefinitely. To
break out of a infinite loop, press [Go]. Obsession runs the next
cue afte the loop.
Obsession User Manual
Action/Command line:
Cue list displays cues 1
through 5
Selects the first cue
Assigns a follow time of five
seconds to the first cue
Assigns a follow time of five
seconds to the remaining cues
Selects the last cue in the
playback loop
Live: CUE 5
Creates a loop by linking the
last cue the first cue
Live: CUE 5 LINK 1
Live: CUE 5 LINK 1 / 4