ETC Obsession User Manual page 278

278 Obsession User Manual
Working with dimmer loads
Obsession, in conjunction with a Sensor AF dimming system, lets
you monitor individual dimmer loads. This helps you identify
burned out lamps, incorrectly lamped fixtures and unplugged
fixtures, among other problems.
The first step in monitoring loads is to record the normal load for
the desired dimmers. By running Record Loads, the system
learns what the correct dimmer loads should be during normal
operation. If at any time the system detects a discrepancy of more
than 20 percent between the recorded and actual loads, it
displays an error message identifying the dimmer that is the
source of the problem. Record Loads should be the last step in
setting up your system.
Note: You may record Loads from the console or from a CEM in
your Sensor AF system. Loads may not be recorded o standard
Sensor systems.