ETC Obsession User Manual page 153

Chapter 11 Submasters
Recording submasters
You can create submasters in Live or Submaster mode.
Keystrokes:
1. Press [Live*].
2. Select channels and set
levels.
3. Press [Record].
4. Press [Sub] [#] [Enter]
or...
Press [Sub Bump #]
Note: Press [Record] [Sub] [Next] [Enter] to record the n t
submaster number after the last submaster recorded.
Adding fade and dwell times to a submaster
Upfade time is how long it takes a submaster's channels to fade
to their recorded levels when you press t e submaster bump
button.
Dwell time is how long the submas r's look holds before the
downfade starts. The Dwell time may also be Hold. (See page
155.)
Downfade time is how l ng t takes a submaster's channels to
fade from their recorded l vels.
When you record fade times for a submaster, you can play the
recorded fade w h the bump button or control it manually with
the slider.
Note: Y u can use the slider to manually override the fade.
Action/Command line:
Creates look
Live: RECORD
The current stage look is
recorded into submaster
Live: RECORD SUB 3
153