ETC Obsession User Manual page 254

254 Obsession User Manual
Phantom mode
In addition to User 1 and User 2, RFUs may be assigned to
Phantom mode. An RFU in Phantom mode may only run dimmer
and channel checks, and park or unpark dimmers and channels.
Levels set by RFUs in Phantom mode do not appear on the Live
display, nor are they recorded into cues, groups or submasters.
If your RFU is a User 1 or User 2 device, you may temporarily
switch it into Phantom 3 mode from the RFU by turning the RFU
off, then pressing and holding [Clear] while you turn it back on.
If your RFU is in Phantom mode, you may temporarily switch it
into User 1 mode from the RFU by turning the RFU off, then
pressing and holding [Clear] while you turn it back on. The RFU
remains in User 1 until it is turned off or reset.
Note: While the RFU is temporarily switched out of its assigned
mode, a yellow triangle marks its User in the Used By colum on
the Multiuser Configuration screen.