ETC Obsession User Manual page 185

Chapter 12 Effects
Recording an effect to a cue
An effect cue interacts with other cues and the keypad in a last
action manner.
An effect loaded to a fader activates the low level when the effect
step first runs. The low level stays active until the effect is
canceled, ends, or control of a channel is taken by a subsequently
activated cue.
You may give an effect a manual upfade or downfade time,
allowing you to fade it up and down with the playback slider. If the
effect has a manual upfade, it must have a manual downfade and
the dwell time is Hold. Effects with a Hold dwell time automati-
cally park to a fader.
An effect with a Hold dwell time runs on the fader until you press
the fader button to begin the downfade. Press the fade button
once to fade out an effect loaded to a playback fader in the
recorded downfade time.
Note: Press the fader button twice to cancel a eff ct from the
fader immediately.
Keystrokes:
1. Press [Live*].
2. Press [Record] and enter
the cue in which to record
the effect.
3. Press [Effect] and nter
the effect to rec rd to the
cue.
4. Press [Enter]
The cue that ollows an effect cue will run channels taken from
the eff ct in its own downfade time. So, if cue 1 contains an
eff ct, cue 2 will run channels it takes from cue 1 in cue 2's down
me.
Action/Command line:
Liv : RECORD CUE 9
Live: RECORD CUE 9 EFFECT
1
Live: RECORD CUE 9 EFFECT
1
185