ETC Obsession User Manual page 136

136
Creating groups
Groups may be numbered 1 through 999.
Keystrokes:
1. Press [Live*].
2. Select channels and set
channel levels.
3. Press [Record].
4. Press [Group] .
5. Enter the group to record. Live: RECORD GROUP 1
6. Press [Enter].
Note: You may press [Record] [Group] [Next] [Enter] to ecord the
next group number after the last group recorded.
Creating a selective group
To create a group using some of the channe s on stage, but not
all, do a selective record. You can either pe ify the channels to
add to the group, or specify the channels to exclude. Follow these
steps to create a group containing hannels 1 through 10 when
channels 1 through 20 are active on stage:
Keystrokes:
1. Press [Live*].
2. Enter [1] [Thru] [1] 0]
or...
Enter [–] [1][1] [Thru] [2][0].
3. Press [Record].
4. P ess [Group] .
Enter the group to record. Live: – CHAN 11 > 20 RECORD
5
6. Press [Enter].
Obsession User Manual
Action/Command line
Creates look
Live: RECORD
Live: RECORD GROUP
Live: RECORD GROUP 1
Action/Command line
Live: CHAN 1 > 10 or
Live: – CHAN 11 > 20
Live: – CHAN 11 > 20 RECORD
Live: – CHAN 11 > 20 RECORD
GROUP
GROUP 1
Live: – CHAN 11 > 20 RECORD
GROUP 1