ETC Obsession User Manual page 57

Chapter 3 System settings
Enable/disable Blackout and Grandmaster
To disable or enable Blackout and the Grandmaster, follow these
steps:
Keystrokes:
1. Press [Setup*].
2. Select [1], System Settings,
and press [Enter].
3. Select [1][1], Blackout/
Grandmaster, and press
[Enter].
4. Press [Enter] to disable these
features if enabled or to
enable them if disabled, or
press [Clear] to cancel the
operation.
Enable/disable Clear Channels in Cue Only
By default, when you create a new cue in Blind, any channels set
to a level in the previous cue t ack into the new cue. Their levels
appear in magenta. When Clear Channels in Cue Only is enabled
and you create a new cue in Cue Only mode, any channels set to
a level in the previou cue are set to zero in the new cue.
Keystrokes:
1. Press [Se up*].
2. Select [1 System Settings,
nd pr ss [Enter].
3. Select [1][2],Clear Channels
in Cue Only, and press
[Enter].
4. Press [Enter] to disable these
features if enabled or to
enable them if disabled, or
press [Clear] to cancel the
operation.
Action/Command line:
Selects System Settings menu
System Settings: ENABLE
BLACKOUT BUTTON?
or...
System Settings: DISABLE
BLACKOUT BUTTON?
System Settings: ENABLE
BLACKOUT BUTTON?
or...
System Settings: DISABLE
BLACKOUT BUTTON?
Action/Command line:
Selects System Settings menu
System Settings: Toggle Clear
Channel Levels in Cue Only
Mode?
System Settings: Toggle Clear
Channel Levels in Cue Only
Mode?
57