ETC Obsession User Manual page 288

288
Error messages
ETCLink provides a wide variety of critical and secondary advisory
messages, including information regarding your dimmers, racks,
system, data, ports, and loads.
Critical messages include rack and dimmer overtemperature or
shutdown messages, rack not responding messages, airflow
messages, and phase missing messages. Critical messages are
posted even when ETCLink advisory messages have been
disabled. Secondary messages may be disabled.
All dimmer error messages appear in yellow on the Dimmer
Status and About Dimmer screens. See Appendix C, Error
messages, on page 345.
Disabling or enabling secondary messages
You may prevent secondary ETCLink advisory messages f om
being displayed while you operate the console, or enable them if
currently disabled.
Note: See Secondary Errors on page 349.
Keystrokes:
1. Press [Setup*].
2 Press [1][1], Dimmer
Monitoring, [Enter].
3. Press [7], Display
Advisories, [Ente ].
4. Press [Enter].
Obsession User Manual
Action/Command line:
Sele ts Dimmer Monitoring
enu
Dimmer Monitoring:
DISABLE DISPLAY OF
ETCLINK ADVISORIES
Dimmer Monitoring:
DISABLE DISPLAY OF
ETCLINK ADVISORIES