ETC Obsession User Manual page 293

Chapter 24 MIDI Show Control
MSC commands received by Obsession
MIDI Show Control (MSC) lets devices send the following five
commands to the Obsession console. If MSC input is enabled on
the console, the console automatically executes the MSC
commands.
Go
Stop
Resume
Load
Fire
MSC commands transmitted by Obsession
MIDI Show Control (MSC) lets the console send the following
commands to MIDI d vices. If MSC output is enabled on the
console, the consol automatically sends the MSC commands.
[Go] or
[GoToCue]
[Lo d Cu ]
M cros
Load
If no cue number is specified, Go is executed on the
Obsession. The pending cue runs.
If a cue number is specified, a Load Cue for that cue
is executed, followed by a Go. The cue runs in its
programmed fade time.
The Stop command holds all fades.
Unlike pressing the [Stop/Back] key, consecutive
Stop commands do not execute a Back c mmand.
Resumes all holding fades.
Executes a Load Cue command.
Executes the specified macro. Macro number must
be in the range 1-127.
Obsession transmits Go with cue number.
Obsession transmits Load with cue number.
For macros 1-127, Obsession transmits Fire with
macro number.
If a fade is running, Obsession transmits Stop. Oth-
erwise, Obsession transmits Go with the number of
the previous cue.
293