ETC Obsession User Manual page 180

180
Random rate
When you select a random rate for an effect, Obsession applies a
random rate to the assigned step time and a separate random rate
to the step fade times. This causes the effect to run at varying
speeds, changing at random, within a range that you select.
Keystroke:
1. Press [S5], Attribute.
2. Press [S7], Random Rate. Effect 4
3. Enter the slowest desired
effect rate.
4. Press [/] and enter the
highest desired effect rate.
5. Press [Enter].
You can manually control effect rates by modifying the rate of the
submaster or cue the effect is loaded into Rate adjustments
affect step times and step In/Dwell/Out times They do not
change the effect's In/Dwell/Out times. See Live control of a
submaster's rate on page 157 and Rate o erride on page 133.
Obsession User Manual
Action/Command line:
Displays attribute softkeys
LO RANDOM RATE
Effect 4 LO RANDOM
RATE 20
Effect 4 LO RANDOM RATE
20 HI RANDOM RATE 80
Effect 4 LO RANDOM RATE
20 HI RANDOM RATE 80