ETC Obsession User Manual page 307

Chapter 25 SMPTE
Internal SMPTE clock
You can use the Internal SMPTE clock to run the SMPTE program
or as a backup to the external source.
You may set a particular time for the internal clock to start at.
Keystrokes:
1. Press [Setup*].
2. Press [9], SMPTE Events,
[Enter].
3. Press [More Softkeys]
[S1], Set Time, [1][5][0][0]
[Enter].
To clear the clock and exit Run Mode, follow these steps:
Keystrokes:
1. Press [Setup*].
2. Press [9], SMPTE Events,
[Enter].
3. Press [More Softkeys] [S3],
Reset Events, [Enter].
Action/Command line:
Selects SMPTE Events display
Sets the current SMPTE time
to 15 seconds
Action/Command line:
Sets the clo k to the First time
and puts the console in Pause
Mode.
307