ETC Obsession User Manual page 101

Chapter 6 Cues
Modifying a recorded cue live
In Live, if you want to add, remove or modify channel levels, you
must play back the cue, make your changes, then re-record the
cue.
Modifying channels in a cue
If you are not familiar with procedures for playing back cues, see
Chapter 9, Playing back cues .
Keystrokes:
1. Press [Live*].
2. Press [Go To Cue], enter cue
number and press [Enter].
3. Select channels and set chan-
nel levels to make the desired
changes to the cue.
4. Press [Record] [Enter] [Enter].
(Second [Enter] confirms.)
Note: If the console is in tracking mode, p e s [Cue Only/Track]
after you press [Record] to keep modificatio s from tracking into
subsequent cues. If in Cue Only mode, [Cue nly/Track] will force
changes to track. For further informa ion bout Cue Only/Track,
see pages 117-118.
Modifying cue attributes
Follow these steps to modify cue attributes:
Keystrokes:
1. Press [Live*
2. Press [Cu ] then enter the
desired cue
3. Press the key or softkey that
corresponds to the attribute
o modify.
4. Enter the new setting for the
attribute.
5. Press [Enter].
Action/Command line:
Plays back selected cue
Modifies cue channel levels
Re-records cue with desired
modifications
Action/Command line:
Selects the cue
Modifies cue attribute
Re-records cue with
modifications
101