ETC Obsession User Manual page 56

56
Setting default cue profile
A profile describes the relationship between the length of a fade,
and the level of a cue or dimmer at each point throughout that
fade. By adjusting the profile's shape you can create a variety of
effects, accomodate for variations and deficiencies in your
fixtures, and protect equipment from stress.
You may assign profiles to dimmers in place of a patch level, or to
cues and cue parts. Obsession provides 32 profiles, including nine
preset profiles and 23 user-definable profiles.
Any profile that starts at 0 and ends at Full may be used as the
default profile for cue playback. Profile zero, a linear profile, is the
default.
Preset profiles include:
0 - Linear (not editable)
1 - IES square
2 - Slow bottom
3 - Fast bottom
4 - Fast top
5 - Full at 1%
6 - Out at 100%
7 - Preheat at 5%
8 - Preheat at 10%
9 - Hot patch
For information about defini g pr files, see page 212.
Keystrokes:
1. Press [Setup*].
2. Select [1], S st m Settings,
and press [E ter].
3. Select [1][0] Default Cue
Pro le, nd press [Enter].
4. En er the profile you wish to
ass gn as the default profile.
5. Press [Enter], or press [Clear]
to cancel the operation.
Obsession User Manual
Action/Command line:
Selects System Settings menu
System Settings: ENTER
DEFAULT PROFILE (0-32):
System Settings: ENTER
DEFAULT PROFILE (0-32): 5
System Settings: ENTER
DEFAULT PROFILE (0-32): 5