ETC Obsession User Manual page 74

74
Independent channels
An independent channel is not affected by the Grandmaster,
[Blackout], [Rem Dim], [Flash], Channel Check, or solo submaster
bump buttons.
Keystrokes:
1. Press [Patch*].
2. If patch is in By Dimmer or By
Label mode, press [S2], By
Channel.
3. Use keypad to enter the num-
ber(s) of the channel(s) to
make independent.
4. Press [S8], Independent.
5. Press [Enter].
Note: Press [Go To Cue] [0] [Enter] to take al channels other than
independent channels to zero. Press [Go To Cue] [Out] [Enter] to
take all channels including independent c annels to zero.
Setting Live channel levels in Patch
In Patch by Channel mo e, you may set channels to levels on
stage.
Keystrokes:
1. Press [Pat h*].
2. If pa ch is in By Dimmer or By
Label
Channel.
3 Use keypad to enter the num-
ber(s) of the channel(s) that
you want to set to a level.
4. Press [At].
5. Enter the desired level.
6. Press [Enter].
Actions:
Selects By Channel mode
Patch: CHAN 18
Patch: CHAN 18
INDEPENDENT
Patch: CHAN 18
INDEPENDENT
Actions:
Selects By Channel mode
ode, press [S2], By
Patch: CHAN 8
Patch: CHAN 8 @
Patch: CHAN 8 @ 40
Patch: CHAN 8 @ 40
Obsession User Manual