ETC Obsession User Manual page 165

Chapter 11 Submasters
Loading groups or effects into submasters
Submasters may contain channels, or may be loaded with groups,
cues or effects, or some combination of the four.
If you load a group into a submaster as described below, the
console links the group and the submaster. While they are
linked, changes to the group's levels automatically appear in
the submaster. Also, the group number is displayed in the
submaster's label field. The link is maintained as long as the
submaster levels are not otherwise changed.
If an effect plays back from a submaster, it interacts with other
cues and submasters on a highest level basis. When an effect is
loaded to a submaster, it fades proportionally between zero and
the effect's high level. The slider acts as a master.
Keystrokes:
1. Press [Load Sub].
2. Enter submaster number.
3. Press [Group] (or [Effect]). Live: LOAD SUB 0 GROUP
4. Enter the group or effect
you wish to load.
5. Press [Enter].
Note: Due to limited memory, you may not be able to load all your
effects to submasters. The actual number depends on effect size.
Action/Command line:
Live: LOAD SUB
Live: LOAD SUB 0
Live: LOAD SUB 10 GROUP 1
L ve: LOAD SUB 10
GR UP 1
165