ETC Obsession User Manual page 81

Chapter 5 Setting channel levels
Undo
Undo lets you switch from a selected channel's current level to its
previous level and back. You may continue to do so until you enter
a new command.
Keystrokes:
1. Press [Live].
2. Select channel(s) and set their
levels. For example press [1]
[Thru] [5] [Full] [Enter].
3. Change levels of the same
channel(s). For example press
[1] [Thru] [5] [At] [5] [Enter].
4. Press [Undo] [Enter].
5. Press [Undo] [Enter].
Note: Undo also lets you clear other commands If you have not
yet pressed [Enter], [Undo] clears the comm nd line.
Action/Command line:
Sets channels 1 through 5 at Full
Live: CHAN 1 > 5 FULL
Sets channels 1 through 5 at 50
percent
Live: CHAN 1 > 5 @ 50%
Sets channels 1 throug 5 b ck
to Full
Live: UNDO
Sets channels 1 through 5 back
to 50 percent
Live: UNDO
81