ETC Obsession User Manual page 67

Chapter 4 Patch
Unpatching individual dimmers
Unpatch dimmers by assigning them to channel zero. Channel
zero is not an actual control channel. It functions as a holding area
for storing dimmers not included in your patch.
Hint: Before you begin creating a patch, assign all dimmers to
channel zero. Then, as you patch, select dimmers from channel
zero and patch them to channels.
If you select default one-to-one patch and you have more
dimmers than channels, Obsession automatically assigns excess
dimmers to channel zero.
Follow these steps to assign dimmers to channel zero in By
Dimmer mode:
Keystrokes:
1. Press [Patch*].
2. If patch is displayed in By
Channel or By Label mode,
press [S1], By Dimmer.
3. Press [S3], Unpatch.
4. Use the keypad to enter the
dimmer(s) you want to patch
to channel zero. Use [+], [–]
and [Thru] if you want to
select more than one dimm r.
5. Press [Enter].
Note: When a dimm r is npatched, its proportion and profile
automatically ret n to their default state.
Action/Command line
Selects By Dimme patch dis-
play
Patch: UNPATCH
Patch: UNPATCH DIMMER
1 > 10
Patch: UNPATCH DIMMER
1 > 10
67