ETC Obsession User Manual page 232

232
Drive management
Obsession's hard disk drive lets you save a large number of
shows on the console. The actual number depends on the size of
the shows.
When you select hard drive options, any fades in progress stop .
Therefore, if you need to load an additional show in the middle of
a performance, load it between cues when all channels are static .
Fader and submaster outputs are maintained as the new show
loads.
Viewing hard drive directory
When you select Hard Drive Functions from the Setup menu you
see a list of all shows currently stored on the hard driv
If you save a show, work on it, then save it again, you will see two
co ies of the show on the hard drive, distinguished only by the
date o time of being saved.
You may list the shows using any of three methods, by name, by
date, and by date in reverse order. Press [S8], Sort, until the
method you desire appears on the command line, then press
[Enter] to select that method. The upper left corner of the display
indicates the method chosen.
The upper right corner of the display indicates the percentage of
hard drive space still available.
Obsession User Manual