ETC Obsession User Manual page 116

116
Cue Only/Track key
The [Cue Only/Track] key allows you to momentarily treat the
console as if it were in the opposite mode from its current setting.
Each of the following examples shows the keystroke sequence
required to set the levels of channels 1 through 5 to full, and the
results of that action.
Live
In Live, use the [Cue Only/Track] key only when recording or
updating cues.
In Tracking mode
Recording/updating without [Cue Only/Track]
[1] [Thru] [5] [Full] [Enter] [Record or Update] [Cue] [1] [E ter]
Cue 1 sets channels 1 through 5 to full. They rema n at full until a
subsequent cue sets them to a different level.
Recording/updating with [Cue Only/Track]
[1] [Thru] [5] [Full] [Enter] [Record or Update] [Cue] [1] [Cue Only/
Track] [Enter]
Cue 1 sets channels 1 through 5 to f l They are set to zero in the
next cue, unless that cue has an ther setting for them.
In Cue Only mode
Recording/updating without [Cue Only/Track]
[1] [Thru] [5] [F ] [En er] [Record or Update] [Cue] [1] [Enter]
Cue 1 sets ch nnels 1 through 5 to full. They are set to zero in the
next cue, unless that cue has another setting for those channels.
Recording/updating with [Cue Only/Track]
[1] [Thru] [5] [Full] [Enter] [Record or Update] [Cue] [1] [Cue Only/
Tr ck] [Enter]
Cue 1 sets channels 1 through 5 to full. They remain at full until a
subsequent cue sets them to a different level.
Obsession User Manual