ETC Obsession User Manual page 226

226
Reading a show and system settings from diskette
When you read a show and system settings from a diskette and
load it into memory, the new show completely overwrites the
current show, including system settings . Therefore, if you want to
keep the current show, store it, as described on page 225, before
you read a new show.
Fades are interrupted during the read operation and do not
resume when read is complete .
Keystrokes:
1. Insert diskette in drive.
2. Press [Setup*] .
3. Press [3], Diskette
functions, [Enter].
4. Press [3], Read all, [Enter]
[Enter].
5. Press [Enter] , or press
[Clear] to cancel.
Once the show information is read into memory, the screen
switches to the Live display.
Reading a show from diskette
When you read
the new show ov rwrites the current show, but does not affect
the current system settings.
To read only he show information, follow the steps listed above,
but press [4], Read Show, [Enter] [Enter] in step 4.
Action/Command line:
Selects Diskette Functions
menu
Diskette Functions: READ
ALL? Please confirm
Message appea s onscreen:
Operation in progress. Please
stand by.
Command line reads:
Diskette Functions: READ
AL ? Please confirm
sh w from a diskette and load it into memory,
Obsession User Manual