ETC Obsession User Manual page 176

176
Assigning effect characteristics
Each step in an effect is assigned its own attributes and time
values. The effect is also assigned attributes and time values that
apply to the effect overall.
Attributes control how the effect plays its steps. All effects are
either positive or negative. When you initially create the effect, it
defaults to a positive chase.
Attributes
In the following, On means setting elements to their high level,
Off means setting them to their low level.
Alternate, Reverse, Bounce, and Build can be combined wit any
other pattern except Random.
[S1] Positive
All elements start Off. Each step turns its assign d elements On
and the previous step's elements Off
[S1] Negative
All elements start On. Each step turns it as igned elements Off
and the previous step's elements On [S1 , Positive/Negative,
toggles back and forth between p sitive and negative.
[S2] Alternate
If the effect is positive, the irst pass through the effect is positive,
the second pass is negative Subsequent passes alternate
between positive an neg tive.
If the effect is negative, the first pass through the effect is nega-
tive, the second pass is positive. Subsequent passes alternate
between neg tive and positive.
[S3] Revers
Steps run in reverse numerical order.
Obsession User Manual