ETC Obsession User Manual page 124

124
Converting a standard cue to a multipart cue in Blind
When you create the first part, all channels in the cue that you
don't assign to the first part are placed in part 8 (even if part 8 is
the first part you create). From part 8, you can assign them to
other parts as you create them.
In this example, cue 4 contains channels 1 through 20.
Keystrokes:
1. Press [Blind*].
2. Press [Cue] [4] [Enter].
3. Press [1] [Thru] [2][0] [Full]
[Enter].
4. Press [Part] [1] [Enter].
Enter [1] [Thru] [5]. Press
[Enter].
5. Press [Part] [2] [Enter].
Enter [6] [Thru] [1][0]. Press
[Enter].
6. Press [Part] [3] [Enter].
Enter [1][1] [Thru] [1][5].
Press [Enter].
Note: If the con ole is in tracking mode, press [Cue Only/Track]
after you ent r channel levels before pressing [Enter]. This keeps
modifications from tracking into subsequent cues. If in Cue Only
mode, [Cue Only/Track] will force changes to track.
Obsession User Manual
Action/Command line:
Blind: CUE 4
Adds channels 1 through 20
at Full to cue 4
Blind: CUE 4 CHAN 1 > 2
FULL
Creates part 1. Places han els 1
through 5 in part 1. Remaining
channels are placed in part 8
Blind: CUE 4 PART 1 CHAN 1
> 5
Creates par 2. Moves channels 6
through 10 om part 8 to part 2
Blind: CUE 4 PART 2 CHAN 6
> 0
Creates part 3. Moves channels
11 through 15 from part 8 to
part 3
Blind: CUE 4 PART 3 CHAN 11
> 15