ETC Obsession User Manual page 156

156
Adding a rate to a submaster
Rate lets you record submasters that play back faster or slower
than their recorded fade times. This can be especially helpful
when you are calculating complex timing information for effects
loaded to a submaster.
Note: If you adjust the rate on an effect submaster, the adjust-
ments affect step times and step In/Dwell/Out times. Rate adjust-
ments don't change the overall effect In/Dwell/Out time.
Fade rate is expressed as a percentage. A submaster with a fade
rate of 100 plays back at its recorded fade time. A rate of 300
plays back three times faster. A rate of 50 plays back half as fast.
Rate may be 0-999 percent.
Keystrokes:
1. Press [Sub*].
2. Press [Sub].
3. Press [7].
4. Press [More Softkeys]
[S5], Rate.
5. Press [2][0][0] to enter a
rate of 200 percent.
6. Press [Enter].
Press the bump button to ta t submaster upfade .
Obsession User Manual
Action/Command line:
Sub: SUB
Sub: SUB 7
Sub: SUB 7 RATE
Sub: SUB 7 RATE 200
Su : SUB 7 RATE 200