ETC Obsession User Manual page 296

296
Enabling external SMPTE input
Before you can run SMPTE programs driven by an external
SMPTE time source, you must enable the SMPTE port.
Keystrokes:
1. Press [Setup*].
2. Press [2], Input/Output
Configuration, [Enter].
3. Press [1], I/O Options,
[Enter].
4. Press [3], External SMPTE
Clock, [Enter].
5. Press [Enter].
Enabling internal SMPTE input
Before you can run SMPTE programs driven by the internal
SMPTE clock, you must enable it.
Keystrokes:
1. Press [Setup*].
2. Press [9], SMPTE Events,
[Enter].
3. Press [More Softkeys]
[S2], Enable Clock
4. Press [S2 Disable Clock. Disables the internal SMPTE
Obsession User Manual
Action/Command line:
Selects Input/Output
Configuration menu
Selects I/O Options menu.
Enable SMPTE?
External SMPTE is enabl d
A tion Command line:
Selects SMPTE Events display
Enables the internal SMPTE
clock. Internal Clock Enabled
appears at the top of the display
clock